High  visibility  traffic  signs
Flashing board with twin lamp SP-HS20-2.A 
A traffic sign with signalling lamps designed for use particularly in towns to warn traffic of a road hazard such as a pedestrian crossing or dangerous bend. Improved visibility due to the twin flashing lamps.
  • 1000 x 1000 mm traffic sign with twin halogen lamp Ø 200 mm (bulb 12V/20W)
  • signalling lamps operate in asynchronous flash mode, automatic night dimming
  • 2 m supply lead, ready for mounting
  • power supply options:
    • may be powered by mains electricity 230V~/50Hz, in which case it may be operated 24 hours a day
    • may be powered from the town's street lighting circuits, in which case operation time is limited by the capacity of the battery (recharged at night only)
    • may also be recharged by solar cells, in which case operation time is dependent on solar cell performance (recharged during daylight hours only)
  • board is mounted using standard traffic sign clamps to a post of min. Ø 60 mm, or to a lamp post using standard street lighting clips and metal straps
  • other traffic signs available on request
  • supplementary plates carrying warning text such as SCHOOL or CAUTION, CHILDREN!

The power supply/battery system is mounted on the board's post.
SP-HS20-2.A


Specifications: 
Power supply voltage12/24V=
Flash frequency55/min.
Mean current consumption 
    12V=day 1,6A, night 1,0A
  
Flashing board power supply SP-HS20-2.A 
Power source - Rectified transformer TR-40 SP
Powered from the mains supply 230V~/50Hz
  • includes a transformer with 230V~/12V= rectifier, which is mounted at the rear of the lamp board, requires the mains connection to be equipped with a circuit breaker
  • may be operated 24 hours a day
  • may be fitted with an optional 230V timer which allows the lamps to be turned on/off at specified times and/or days of the week
Power source - Battery & charger SP
Powered from the 230V~/50Hz street lighting circuit.
  • includes charger, 12V/55Ah battery and 12V= timer, all in a single case suitable for mounting on the post behind the board, using clamps from the traffic signs section
  • the timer allows three daily periods of operation to be set, 12 hours of operation in total
Power source - Solar cell SP
Solar-powered.
  • includes battery charging regulator, 12V/55Ah battery and 12V= timer installed in a single case mounted on the rear side of the board
  • comes complete with solar cells located above the light board
  • includes load-bearing frame for the light board and solar cell
  • the timer allows three daily periods of operation to be set
  • does not require mains power supply
Power source - Solar cell SP
Ref. - No.Product
1-910-100020Flashing board with twin lamp SP-HS20-2.A
 Accessories
1-910-5000Power source - Rectified transformer TR-40 SP
1-910-5020Power source - Battery & charger SP
1-910-5030Power source - Solar cell SP-80
1-910-8005Timer CS-230V for TR-xxx

|   Home   | |   About Us   | |   News   | |   Interest   | |   Products   | |   Contact Us   |